top of page

N20 Stencil Cleaning Equipment

N20 STENCIL CLEANING

PRODUCT DESCRIPTION

In order to meet your daily SMT adhesive or Solder paste stencil cleaning requirements, even for frameless stencils, the N20 machine is an efficient and innovative solution. Specially designed to provide high cleaning performance, the stencil is immersed in the upright position and submitted to the superior cleaning performance of perpendicular ultrasound and is perfectly cleaned in just a few minutes.

The in-line filtration removes continuously the soil loading and keeps the cleaning medium at high quality levels.

The use of an aqueous product (no flash-point, low VOC content) that makes it possible to separate the residues, ensures a 100% closed loop cleaning process to meet today’s economic and environmental demands.

CHARACTERISTICS

  • Ultrasonic Cleaning system,

  • Water based process in close loop,

  • Rinsing with filtered cleaning liquid,

  • No water, no air compressed,

  • Magnetic driven pumps to avoid leaking,

TECHNICAL DATA

General

  • Dimension (Length X Width X Height): 1100 X 690 X 980mm

  • Empty Weight: 160 Kg

  • Voltage Supply: 230v Single Phase 50hz 16a ± 5% Plug
     

Ultrasonics

  • Ultrasonic Area: 550 X 450 mm

  • Power: 1 Kwa
     

Cleaning Unit

  • Volume: 55 Liters

  • Pumps: 2 Magnetic Driven

  • Filters: 2 Standards 20in 5μm Filters

  • Time Cycle: 2 Adjustable Timers
     

Tools

  • Frameless Stencil Adaptor Standard Size Available, Special Size On Request

  • Misprinted Boards Tool Maximum Area : 500 X 500 mm

  • Squeegee And Tools Stainless Steel Basket: 500 X 40 X 80 mm

N29 SA4 Stencil Cleaning Equipment

N29 SA4 STENCIL

PRODUCT DESCRIPTION

In order to meet your daily SMT adhesive or Solder paste stencil cleaning requirements, even for frameless stencils, the N29 SA4 machine is an efficient and innovative solution. Specially designed to provide high cleaning

performance, the stencil is immersed in the upright position and submitted to the superior cleaning performance of perpendicular ultrasound and is perfectly cleaned in just a few minutes. The in-line filtration removes continuously the soil loading and keeps the cleaning medium at high

quality levels. The use of an aqueous product (no flash-point, low VOC content, PH neutral) that makes it possible to separate the residues, ensures a 100% closed loop cleaning process to meet today’s economic and environmental demands.

CHARACTERISTICS

  • Ultrasonic Cleaning system,

  • Water based process in close loop,

  • Rinsing with filtered cleaning liquid,

  • No water, no air compressed,

  • Magnetic driven pumps to avoid leaking,

  • Automated lift after cleaning cycle,

  • Drying system included.

TECHNICAL DATA

GENERAL

  • Dimension (Length x Width x Height):  1100 x 700 x 1015 mm

  • Empty weight: 200 kg

  • Voltage supply: 230V single phase 50/60Hz 16A ± 5% plug
     

ULTRASONICS

  • Ultrasonic area: 550 x 450 mm

  • Power: 700 W
     

CLEANING UNIT

  • Volume: 55 Liters

  • Pumps: 2 magnetic driven

  • Filters: 2 standards 20in 5µm filters

  • Time cycle: 3 minutes solder paste ; 10 minutes glue
     

DRYING UNIT

  • Crossflow fan : maximum flow rate 17m3/h

  • Heating element:  1500W Stainless steel element with thermostat

  • Time cycle: From 10 to 15 minutes
     

TOOLS

  • Frameless Stencil adaptor Standard sizes available, special sizes on request

  • Misprinted boards tool Maximum area: 500 x 500 mm

  • Squeegee and tools Stainless steel basket:  500 x 40 x 80 mm

N29 AUTO Automatic Stencil Cleaning Equipment

N29 AUTO AUTOMATIC

PRODUCT DESCRIPTION

In order to meet your daily SMT adhesive or solder paste stencil cleaning requirements, even for frameless stencils or pump print, the N29AUTO machine is an efficient and innovative solution. Specially designed to provide high cleaning performance, the stencil is introduced into the loading cell of the equipment and automatically immersed in the upright position and submitted to the superior cleaning performance of perpendicular ultrasound and is perfectly cleaned in just a few minutes. Alternatively, a spray under immersion system can replace the ultrasonic for the cleaning of your sensitive screens or stencils. Following the cleaning cycle the stencil automatically rises, passing through sprays of filtered cleaning liquid. It is then dried into the loading cell. The in-line filtration removes continuously the soil loading and keeps the cleaning medium at high quality levels.

CHARACTERISTICS

  • Fully automatic Ultrasonic or Spray Under Immersion Cleaning system,

  • No contact with chemistry,

  • Water based process in close loop,

  • Rinsing with filtered cleaning liquid

  • No water,

  • Magnetic driven pumps to avoid leaking,

  • Drying system included.

TECHNICAL DATA

GENERAL

  • Dimension (Length x Width x Height) : 1100 x 700 x 2000 mm

  • Empty weight :300 kg

  • Voltage supply: 230V Single phase + neutral 50/60Hz 16A ± 5% plug
     

ULTRASONICS

  • Ultrasonic area: 550 x 450 mm

  • Power : 700 W
     

CLEANING UNIT

  • Volume :110 Liters

  • Pumps: 2 magnetic driven

  • Filters : 2 standards 20in 5μm filters

  • Time cycle : 3 minutes solder paste ; 10 minutes glue
     

DRYING UNIT

  • Crossflow fan maximum flow rate: 2 x 17m3/h

  • Heating element : 7 elements, 400W each

  • Time cycle: From 8 to 15 minutes
     

TOOLS

  • Frameless Stencil adaptor Standard sizes available, special sizes on request

  • Misprinted boards tool Maximum area a: 500 x 500 mm

  • Squeegee and tools Stainless steel basket : 500 x 40 x 80 m

N29ECO Stencil Cleaning Equipment

N29 ECO STENCIL CLEANING

PRODUCT DESCRIPTION

In order to meet your daily stencil cleaning requirements, even for frameless stencils, the N29ECO machine is an efficient and innovative solution. Specially designed to provide high cleaning performance, the stencil is immersed in the upright position and submitted to the superior cleaning performance of perpendicular ultrasound and is perfectly cleaned in just a few minutes. The in-line filtration removes continuously the soil loading and keeps the cleaning medium at high quality levels. The use of an aqueous product (no flashpoint, low VOC content) that makes it possible to separate the residues, ensures a 100% closed loop cleaning process to meet today’s economic and environmental demands.

CHARACTERISTICS

  • Ultrasonic Cleaning system,

  • Water based process in close loop,

  • Rinsing with filtered cleaning liquid,

  • No water, no air compressed,

  • Magnetic driven pumps to avoid leaking,

  • Drying system included.

TECHNICAL DATA

GENERAL

  • Dimension (Length x Width x Height): 1100 x 690 x 980mm

  • Empty weight: 160 kg

  • Voltage supply: 230V single phase 50/60Hz 16A ± 5% plug
     

ULTRASONICS

  • Ultrasonic area: 550 x 450 mm

  • Power: 700 W
     

CLEANING UNIT

  • Volume: 55 Liters

  • Pumps: 2 magnetic driven

  • Filters: 2 standards 20in 5µm filters

  • Time cycle: 3 minutes solder paste; 10 minutes glue
     

DRYING UNIT

  • Crossflow fan maximum flow rate: 17m3/h

  • Heating element: 1500W Stainless steel element with thermostat

  • Time cycle: From 15 to 20 minutes
     

TOOLS

  • Frameless Stencil adaptor Standard size available, special size on request

  • Misprinted boards tool Maximum area: 500 x 500 mm

  • Squeegee and tools Stainless steel basket: 500 x 40 x 80 mm

bottom of page